Revel embrace Guida Utente

SPEAKER CONNECTIONS

The EMBRACE surround speakers can be connected to your sys-
tem in a variety of ways, as discussed in the following sections.
Also, please observe these points:

• Use high-quality speaker cable of sufficient gauge (maximum

total loop resistance of 0.1 ohms per channel) with high-quali-
ty connectors between the speaker and your audio system.
Consult your Revel dealer as to specific recommendations for
your application.

• Turn off all audio system power before making any connections.

• Read the owner’s manuals that were included with your audio

components to confirm their connection procedures.

• Verify correct polarities (i.e., + to + and - to -) when making

connections. Failure to do so will degrade the EMBRACE’s
performance.

DIPOLE OR BIPOLE SYSTEM CONNECTIONS

For dipole or bipole operation, simply leave the EMBRACE short-
ing straps in place. Using correct polarity, connect either set of ter-
minals to an amplifier channel output, as shown in Figure 16.

EMBRACE Rear

Set MODE Control To
“Dipole” Or “Bipole”

Mode

Control

(on front)

Remote

Dipole

Bipole

Connector Panel

Amplifier

(rear)

(one channel shown)

Leave

Shorting Straps

In Place