Baumatic bfw1400 Manuale Utente
21
MAINTENANCE AND CLEANING:
Please note: Before attempting any kind of maintenance or
cleaning on your washing machine:
9
Unplug your machine
9
Close the Water Tap
.
WATER INLET FILTERS
On the tap part of your machine’s water inlet hose and the ends of the water
inlet valves, there are filters to prevent dirt and foreign materials from getting
into the water.
* Note: If your Washing Machine cannot get enough water (even
though your water tap is open), it means that these filters will
need cleaning.
need cleaning.
9
REMOVE THE WATER INLET HOSE (SEE DIAGRAM BELOW)
9
REMOVE THE FILTERS FOUND ON THE WATER INLET VALVES BY USING
PLIERS AND WASH THOROUGHLY WITH A BRUSH.
9
CLEAN THE FILTERS OF THE WATER INLET HOSES AT THE TAP SIDE BY
MANUALLY REMOVING THEM AND THE SEAL.
9
AFTER CLEANING THE FILTERS, FIT THEM BACK IN THE SAME WAY AS
YOU HAD REMOVED THEM.
_________________________________________________________
PUMP FILTER
The PUMP FILTER SYSTEM prolongs the life of your PUMP, which drains
away the dirty water. It also keeps lint from entering the pump.
away the dirty water. It also keeps lint from entering the pump.
You should clean your pump filter every 2-3 months.
To clean your PUMP FILTER, see the diagram and instructions on
the following page: