Buffalo wbr2-g54 Guida All'Installazione Rapida

Depending on the type of broadband internet service you are subscribed 
to, different types of information may be needed to complete the setup.  
Acquiring this information in advance will make the setup of your AirStation 
router simple and quick.  A quick call to your service provider’s customer 
or technical support number will provide you with the needed information if 
you are unsure.  If you are connecting to the internet via DSL service, then 
PPPoE information will most likely be required from your ISP.

1.  Power down the cable or DSL modem and the computer which will be 

used to confi gure the AirStation router.

2.  Plug the cable or DSL’s LAN Ethernet cable into the AirStation’s WAN 

port.  Initially, you may need to unplug this cable from your computer, 
hub or other router.

3. Plug the provided Ethernet cable into a LAN port on the AirStation and 

plug the other end into your computer’s Ethernet adapter’s (NIC) 
port.  If you plan to initially confi gure the AirStation wirelessly (not 
recommended), you may skip this step.

4. Power on your cable or DSL modem and wait one full minute, Power 

on the AirStation router, wait one full minute, and then power on the 
computer which will be used to confi gure the AirStation.  If the red 
DIAG light on the AirStation is lit or fl ashing after several minutes 
of being powered on, please consult Buffalo Technology Technical 
Support.