Panasonic aj-sdx900 Manuale Utente
57
Chapter 5 Preparation
5
Using the battery pack made by Panasonic
1
Remove the battery holder.
Battery holder
2
Attach the battery case to the unit.
1 Connect the unit’s cable with the cable of the AU-
M402H battery case.
2 Use a screwdriver to attach the AU-M402H battery
case to the unit.
The holes for tightening the screws can be seen when
the cover is opened and the rubber caps are raised.
Use a screwdriver to tighten the screws, and attach the
battery case to the unit. Ensure that the screws are
tightened up as far as they will go.
The holes for tightening the screws can be seen when
the cover is opened and the rubber caps are raised.
Use a screwdriver to tighten the screws, and attach the
battery case to the unit. Ensure that the screws are
tightened up as far as they will go.
<Note>
≥
≥
Do not pull the rubber caps with great force.
≥
Be careful not to catch up the cables when attaching the
battery case.
battery case.
Connect
here.
here.
AU-M402H
battery case
battery case
3
Connect the plug of the battery pack to the connector
inside the battery case, and insert the battery pack into
the case.
inside the battery case, and insert the battery pack into
the case.
<Note>
Ensure that the power is turned off before connecting or
disconnecting the plugs.
Ensure that the power is turned off before connecting or
disconnecting the plugs.
AU-BP402
battery pack
battery pack
Label
surface
surface
4
Set the battery type.
Select the battery setting that corresponds to the battery
made by Panasonic for the BATTERY SELECT item on
the <BATTERY/TAPE> screen.
For details, refer to “Chapter7 Menu description tables.”
Select the battery setting that corresponds to the battery
made by Panasonic for the BATTERY SELECT item on
the <BATTERY/TAPE> screen.
For details, refer to “Chapter7 Menu description tables.”
Usable battery made by Panasonic:
• AU-BP402
• AU-BP402
Usable battery made by IDX:
• BP-H120
• BP-H120