Panasonic hdc-hs20 Guida Utente

VQT1Y00

Recording (Basic)

It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)

¬Change the mode to 

A Target frame
≥

 will be displayed on the screen.

≥ The target frame will track the face framed 

in prioritized face framing (orange) when 
the Intelligent auto mode is set to 

 

(portrait).

≥ Available target lock range will be displayed 

in red frame when the Intelligent auto mode 
is set to anything but 

 (portrait).

≥ When you touch the head of the object, the 

target frame on the head gets locked and 
tracking starts.

≥ Touch the object to be changed again 

when you want to change the target.

≥ When the Intelligent auto mode is selected, 

the setting becomes 

 (normal) and 

touched object is tracked. Selection 
becomes 

 (portrait) when target frame 

is locked on a face.

≥ When you touch [RETURN], the tracking 

function will be canceled.

∫ About target frame

≥ When the 

 button is pressed halfway, the 

focus is set to the object that is locked. The 
target frame turns green when it focuses, and 
the target cannot be changed.

≥ When target lock fails, the target frame blinks 

in red and then disappears. In such cases, 
touch the object again and lock the target.

≥ The frame out assist B is displayed when the 

target frame gets close to framing out.

≥ This function cannot be used in Manual mode.
≥ It may track different objects or may not lock 

the target depending on the recording 
conditions such as the following:
jWhen the object is too large or too small
jWhen color of the object is similar to the 

background

jWhen using zoom
jWhen the camera is shaking
jWhen more than one object overlaps
jWhen the scene is dark
jWhen the subject moves quickly

≥ A message will be displayed when an object 

becomes unable to be tracked half-way through. 
In such cases, touch the object one more time.

≥ AF tracking will be canceled in the following cases.

jWhen the mode is changed
jWhen the power is turned off
jWhen the Scene mode is set
jWhen the Intelligent auto mode is set to on/off

≥ After setting [DISPLAY] to [OFF] if no operation 

is performed for about 3 seconds, the 
operation icon disappears. Touch the screen to 
display the icon again. When the AF tracking is 
used, the icon does not disappear.

HDCSD20&SD25&HS20P-VQT1Y00_eng.book  59 ページ  ２００８年１２月２２日　月曜日　午後８時１６分