Panasonic PV-GS36 Guida Al Funzionamento
17
Before Using
Recharging the built-in lithium battery
If [
] or [--] is appears when the Camcorder is
turned on, then the built-in lithium battery has run
down. Use the steps below to charge the battery.
When the battery is inserted for the first time after
charging, [SET DATE AND TIME] will appear.
Select [YES] and set the date and time.
Connect the AC adaptor to the Camcorder or
place the battery on the Camcorder, and the built-
in lithium battery will be recharged. Leave the
camera as is for approx. 24 hours, and the battery
will drive the date and time for approx. 6 months.
(Even if the [OFF/ON] Switch is set to [OFF], the
battery is still being recharged.)
down. Use the steps below to charge the battery.
When the battery is inserted for the first time after
charging, [SET DATE AND TIME] will appear.
Select [YES] and set the date and time.
Connect the AC adaptor to the Camcorder or
place the battery on the Camcorder, and the built-
in lithium battery will be recharged. Leave the
camera as is for approx. 24 hours, and the battery
will drive the date and time for approx. 6 months.
(Even if the [OFF/ON] Switch is set to [OFF], the
battery is still being recharged.)
Using the Viewfinder/ LCD Monitor
Before using the Viewfinder, adjust the field of view
so that the displays inside the Viewfinder become
clear and easy to read.
so that the displays inside the Viewfinder become
clear and easy to read.
1
Pull the Viewfi nder.
Using the Viewfinder
• The Viewfinder will be activated.
With the LCD Monitor open, you can also record the
picture while watching it.
picture while watching it.
1
Place your Thumb on the [OPEN] Knob
and pull the LCD Monitor out in the
direction of the arrow.
direction of the arrow.
• The LCD Monitor will be activated.
• It can open up to 90°.
• It can open up to 90°.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
• The LCD Monitor can rotate a maximum of
180°
1
from the vertical position upwards
and a maximum of 90°
2
to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the
Camcorder.
beyond these ranges will damage the
Camcorder.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
• Make sure the Card Slot Cover is closed.
• Make sure the Card Slot Cover is closed.
1
180°
2
90°
Using the LCD Monitor
2
Adjust by turning the Eyepiece Corrector
Knob.
• You can adjust the brightness of the Viewfinder
from the Menu.
• The brightness and color level of the LCD Monitor
can be adjusted from the Menu.
• If it is forcibly opened or rotated, the Camcorder
may be damaged or fail.
• Check that the Card Slot Cover is closed before
closing the LCD Monitor.
• If the LCD Monitor is rotated by 180° towards the
lens and the Viewfinder is opened (when recording
yourself), the LCD Monitor and the Viewfinder
simultaneously light.
yourself), the LCD Monitor and the Viewfinder
simultaneously light.
When [ LCD SET] or [ EVF SET] on the [
SETUP] Sub-Menu is set to [YES], the following
items are displayed.
SETUP] Sub-Menu is set to [YES], the following
items are displayed.
[ LCD SET] LCD Brightness [ ]
Adjusts the brightness of the image on the LCD
screen.
screen.
[ LCD SET] LCD Color Level [ ]
Adjusts the color saturation of the image on the LCD
screen and the Viewfinder.
screen and the Viewfinder.
[ EVF SET] Brightness of the Viewfinder
[
[
]
Adjusts the brightness of the image in the Viewfinder.
To Adjust
Move the Joystick Control [▲] or [▼] and select
the item to be adjusted, and then move the
Joystick Control [◄] or [►] to raise or lower the
number of vertical bars in the Bar Indication.
• More vertical bars indicates stronger brightness
the item to be adjusted, and then move the
Joystick Control [◄] or [►] to raise or lower the
number of vertical bars in the Bar Indication.
• More vertical bars indicates stronger brightness
or color saturation.
• Press the [MENU] Button or the Joystick Control
to complete the settings.
Adjusting Brightness and Color Level
LCD SET
SET
SETUP ENTER EXIT
SETUP ENTER EXIT
EVF SET
SET ENTER EXIT