Panasonic SDR-S150 Guida Al Funzionamento
99
VQT0X39
PUSH THE RESET SWITCH.
An irregularity in the equipment has been detected.
Remove the SD card then press the reset switch to restart
the unit. (P105)
Remove the SD card then press the reset switch to restart
the unit. (P105)
CHANGE TO MANUAL
MODE.
MODE.
You have set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] and are attempting to set [SCENE MODE] from
the menu screen.
[AUTO] and are attempting to set [SCENE MODE] from
the menu screen.
CANCEL MAGICPIX MODE.
You are attempting to set [SCENE MODE] from the menu
screen while MAGICPIX is set. (P45)
screen while MAGICPIX is set. (P45)
TURN OFF POWER LCD.
You are attempting to set [LCD AI] from the menu screen
when the [POWER LCD] button has been pressed to
brighten the LCD monitor.
when the [POWER LCD] button has been pressed to
brighten the LCD monitor.
NO INK IN PRINTER.
Check the connected printer.
NO PAPER IN PRINTER.
PRINTER ERROR.
PLEASE CONNECT AC
ADAPTOR AND BATTERY.
ADAPTOR AND BATTERY.
The AC adaptor has not been connected or the battery
has not been inserted while the unit is connected to the
PC in PC Connection mode.
has not been inserted while the unit is connected to the
PC in PC Connection mode.
CHANGE MODE TO USE
USB.
USB.
The USB cable is connected in the motion picture
playback mode.
playback mode.
DISCONNECT USB CABLE.
Another mode has been selected from the PC Connection
mode while the USB cable was still connected.
mode while the USB cable was still connected.
Disconnect the USB cable and ensure that the battery has
been inserted in the unit. Then connect the AC adaptor
and the USB cable.
been inserted in the unit. Then connect the AC adaptor
and the USB cable.
This indication appears if the USB cable remains
connected for more than 5 minutes when a printer or the
PC is connected.
connected for more than 5 minutes when a printer or the
PC is connected.
The unit’s power cannot be turned off which the unit is
connected to the PC.
connected to the PC.
VQT0X39ENG.book 99 ページ ２００６年６月１４日 水曜日 午前１０時５１分