Panasonic bb-hgw700 Manuale Utente

Operating Instructions

88

•

An example of Destination IPv6 WAN address / Destination LAN network setup

IPsec Connection: Example 2
In the example below, IPsec will not operate because the two networks are the same.

•

The prefix length of the destination LAN network

When the destination is this product, set the prefix length as below.

•

When viewing images from an IPv6 compatible camera (e.g. BB-HCM311A) via a destination 
router when connected using IPsec, set the camera's network (IPv6) to Enable for Access from the 
Internet. For more details see the camera's Operating Instructions.

Selecting Enable, enables the entered IPsec settings. When you do 
not want to use IPsec select Disable. Even if Disable is selected the 
entered settings will not be deleted.

Sets the pre-shared key. Enter between 8 and 64 alphanumeric 
characters. The secret shared key used in IPsec is created based on 
the pre-shared key, so do not let third parties know your pre-shared 
key. This is in order to maintain communication security.

Sets the other party's WAN IPv6 global address.

Set the other party's LAN network prefix and prefix length. Set a 
global prefix for the prefix. Also, make sure that this product's LAN 
side network is a different network from the destination's LAN side 
network. Please note that a link local address cannot be set.

Sets detailed IPsec-related settings. (see page 89)

–

Tunneling, Static v6 Connection:

Set the prefix length set on LAN side prefix.

–

6to4 Connection:

Set the prefix length to 48.

Own LAN Network 1:
2001:1001:           ::/64

Destination LAN Network 2:
2001:1002:           ::/64

Destination IPv6 WAN address
2001:1002::

Enter "2001:1002::          " for the Destination IPv6 WAN address.
Enter "2001:1002:          ::", prefix length "64" for the Destination LAN network.

Own LAN Network 1:
2001:1001:           ::/64

Destination LAN Network 2:
2001:1001:           ::/64

2001:1002::