Billion 5102 Guida Utente

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 

clients to obtain TCP/IP configuration at start-up from a server. 

  

If set to Enable, your BIPAC 5102 Series can assign IP addresses, an IP default gateway 

and DNS servers to Windows 95, Windows NT and other systems that support the DHCP 

client. 

If set to disabled, the DHCP server will be disabled. 

If set to Relay, the BIPAC 5102 Series acts as a surrogate DHCP server and relays DHCP 

requests and responses between the remote server and the clients. Enter the IP address of 

the actual, remote DHCP server in the Remote DHCP Server field in this case. 

When DHCP is used, the following items need to be set. 

 Starting IP Address: This field specifies the first of the contiguous addresses in the IP 

address pool. 

 IP Pool Count: This field specifies the size or count of the IP address pool. 

 

The current lease time of client. 

 Primary DNS Server: Enter the IP addresses of the DNS servers. The DNS servers are 

passed to the DHCP clients along with the IP address and the subnet mask. 

 Secondary DNS Server: Enter the IP addresses of the DNS servers. The DNS servers 

are passed to the DHCP clients along with the IP address and the subnet mask. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30