Billion 7300N Guida Utente

Step 4: New WPS device have join into the wireless network.

Adding a new WPS device (wireless client) to a network - Use PIN Method

Step 1: Open wireless client’s WPS utility, select “Join a wireless network” and apply “next”

button.

5.3.1.6 DHCP Server

You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or

enable the router’s DHCP relay functions. The DHCP protocol allows your router to

dynamically assign IP addresses to PCs on your network if they are configured to obtain IP

addresses automatically.

DHCP Server Mode: Disable

To disable the router’s DHCP Server, check Disabled and then click Apply. When the

DHCP Server is disabled, you will need to manually assign a fixed IP address to each PC on

your network, and set the default gateway for each PC to the IP address of the router (the

default is 192.168.1.254).