Billion 7300N Guida Utente

 

address from your ISP. 

 Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap. 

 Obtain DNS Automatically: Select this check box to use DNS. 

 Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS 

servers are passed to the DHCP clients along with the IP address and the Netmask. 

~ Always on: If you want the router to establish a PPPoE session when starting up 

and to automatically re-establish the PPPoE session when disconnected by the ISP. 
~ Connect to Demand (un-select Always On): If you want to establish a PPPoE 

session only when there is a packet requesting access to the Internet (i.e. when a 

program on your computer attempts to access the Internet). In this mode, you must set 

Idle Timeout value at same time.

Auto-disconnect the broadband firewall gateway when there is no activity 

on the line for a predetermined period of time. The minimum value is 10 minutes.

 

 MTU: Maximum Transmission Unit. The size of the largest datagram (excluding 

media-specific headers) an IP attempts to send through the interface. 

 

  PPPoA Connection (ADSL) 

PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides 

access control and billing functionality in a manner similar to dial-up services using PPP. 

 

 

 Description: User-definable name for the connection. 

 VPI/VCI: Enter the VPI and VCI information provided by your ISP.  

 Encapsulation method: Select the encapsulation format, the default is LLC. Select the