Billion 7300N Guida Utente

 

  PPPoE (EWAN) 

 PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services 

using PPP.  

 

 Line  Speed: Set the downstream and upstream of your connection in kilobytes per 

second. The connection speed is used by QoS settings. 

 Username: Enter the username provided by your ISP. You can input up to 128 

alphanumeric characters (case sensitive). This is in the format of “username@ispname” 

instead of simply “username”. 

 Password: Enter the password provided by your ISP. You can input up to 128 

alphanumeric characters (case sensitive). 

 Service Name: Enter a name for this connection. 

 NAT: The NAT (Network Address Translation) feature allows multiple users to access the 

Internet through a single IP account, sharing a single IP address. If users on your LAN have 

public IP addresses and can access the Internet directly, the NAT function can be disabled. 

 IP  Address:  Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP 

address from your ISP.  

 Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap. 

 Obtain DNS Automatically: Select this check box to use DNS. 

 Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS 

servers are passed to the DHCP clients along with the IP address and the subnet mask. 

Select Enable and enter a MAC address that will temporarily change 

your router’s MAC address to the one you have specified in this field. Leave it as Disabled if 

you do not wish to change the MAC address of your router.