WinBook xl Guida Utente
Panel/System. Once in the System window, click on the Device Manager tab. If the drivers are
loaded, you should see the "Cirrus Logic PCIC compatible PCI to PCMCIA Bridge."
loaded, you should see the "Cirrus Logic PCIC compatible PCI to PCMCIA Bridge."
To use the PC Card:
Open the PCMCIA door.
Insert the card into one of the two slots (the slots are identical).
Push to make sure to it is properly seated (the eject button will move out when the card is
seated). When you insert your PCMCIA card, Windows 95 should recognize the card (if it is
one you have used before) and beep twice. A card icon will appear on the taskbar.
If the card is new to your system, Windows 95 will attempt to recognize it and load the
necessary drivers. When the installation is complete, you will hear two beeps and a card icon
will appear on the taskbar.
If Windows 95 does not recognize the card, you will be prompted to complete the installation
of the necessary drivers. You can find the driver for your card, use a standard driver for the
hardware or, if you have a disk from your manufacturer, you can load the drivers provided.
Follow the instructions provided by the installation wizard. If you use a standard driver and
one not specific for your card, the card should work, but certain features, such as power
management, might not be active. When the installation is complete, you will hear two beeps
and a card icon will appear on the taskbar.
If the card has any external connections, secure them to the card and the necessary external
device.
Insert the card into one of the two slots (the slots are identical).
Push to make sure to it is properly seated (the eject button will move out when the card is
seated). When you insert your PCMCIA card, Windows 95 should recognize the card (if it is
one you have used before) and beep twice. A card icon will appear on the taskbar.
If the card is new to your system, Windows 95 will attempt to recognize it and load the
necessary drivers. When the installation is complete, you will hear two beeps and a card icon
will appear on the taskbar.
If Windows 95 does not recognize the card, you will be prompted to complete the installation
of the necessary drivers. You can find the driver for your card, use a standard driver for the
hardware or, if you have a disk from your manufacturer, you can load the drivers provided.
Follow the instructions provided by the installation wizard. If you use a standard driver and
one not specific for your card, the card should work, but certain features, such as power
management, might not be active. When the installation is complete, you will hear two beeps
and a card icon will appear on the taskbar.
If the card has any external connections, secure them to the card and the necessary external
device.