Panasonic KX-TG5200 Guida Utente

• You can stop registration by pressing [OFF] on the handset and pressing 

LOCATOR [ ], [ ], [ ], [ ] or [

] on the base unit.

• If “Wrong handset Refer to manual” is displayed, the handset you tried to 

register is not for this base unit. This handset is for KX-TG6500 base unit. The 
accessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order, 
see page 3.

Base unit: Press and hold LOCATOR [ ], [ ], [ ], [ ] or [

] for 3 

seconds.

• The CHARGE indicator flashes. After the CHARGE indicator starts flashing, 

the rest of the procedure must be completed within 1 minute.

Handset:
(1) Press the soft key (

).

(2) Wait until a long beep sounds and the 

display shows the new extension number 
(ex. extension number 2). 

• Registration is complete.

If you have not canceled the handset’s registration at the previous base unit 
(p. 52), the handset number remains in that base unit’s memory. To erase the 
handset number from the previous base unit, see the base unit’s Operating 
Instructions. For the KX-TG5200 or KX-TG5202 base unit: (1) Press and hold 
LOCATOR [

] until the CHARGE indicator flashes, and (2) Press and hold 

LOCATOR [ ], [ ], [ ] or [ ] for the handset that you do not want until the 
CHARGE indicator flashes rapidly. When the indicator stops flashing, the 
handset number is erased.

Press LOCATOR 

on base unit 

for 3 sec.

Then press OK

 

 

 SPIPRIVACY

1

Handset [2]

   Registered

[2]