3com 8807 Guida Di Riferimento

Ethernet port view

None

Use the lacp enable command to enable LACP.

Use the undo lacp enable command to disable LACP.

# Enable LACP for Ethernet port Ethernet1/1/1.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] interface Ethernet1/1/1

 

[3Com-Ethernet1/1/1] lacp enable 

lacp port-priority port-priority-value

undo lacp port-priority

Ethernet port view

port-priority-value: Port priority, in the range of 0 to 65,535. By default, it is 
32,768.

Local:

Port-Priority: 32768, Oper key: 1, Flag: 
0x00 

Port priority, operation key, LACP state flag of 
the local end 

Remote:

System ID: 0x0, 0000-0000-0000

Port Number: 0, Port-Priority: 0, Oper-key: 
0, Flag: 0x00 

Device ID, port priority, operation key, LACP 
state flag of the remote end 

Received LACP Packets: 0 packet(s), Illegal: 0 
packet(s) 

Received LACP packets 

Sent LACP Packets: 0 packet(s) 

Sent LACP packets

Table 23   Description on the fields of the display link-aggregation interface command