3com 8807 Guida Di Riferimento
290
C
HAPTER
19: VLAN-ACL C
ONFIGURATION
C
OMMANDS
Example
# Synchronize ACL configuration of VLAN 5 to Ethernet3/1/1 port manually.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet3/1/1
[3Com-Ethernet3/1/1]port can-access vlan-acl vlan 5
display
vlan-acl-member-ports
Syntax
display vlan-acl-member-ports vlan vlan-id
View
Any view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4,094.
Description
Use the display vlan-acl-member-ports command to view in this VLAN the ports
with the ACL configuration of the VLAN synchronized to.
with the ACL configuration of the VLAN synchronized to.
When a port is added to a VLAN, you may fail to synchronize the VLAN-ACL
configuration of the VLAN because the resources are not enough or user-defined
flow templates are applied to ports. You can use this command to view the ports
to which the ACL rule configured on the specified VLAN is applied.
configuration of the VLAN because the resources are not enough or user-defined
flow templates are applied to ports. You can use this command to view the ports
to which the ACL rule configured on the specified VLAN is applied.
Example
# View the ports to which the ACL rule configured on VLAN 5 is applied.
<SW8800>display vlan-acl-member-ports vlan 5
Vlan-acl member port(s):
Ethernet2/1/11 Ethernet2/1/20 Ethernet2/1/21
Ethernet2/1/22 Ethernet2/1/23 Ethernet2/1/24
Ethernet2/1/25 Ethernet2/1/40