3com 8807 Guida Di Riferimento
Netstream Configuration Commands
871
enable
Syntax
enable
undo enable
View
Netstream aggregation view
Parameter
None
Description
Use the enable command to enable the aggregation mode corresponding to the
current aggregation view.
current aggregation view.
Use the undo enable command to disable this aggregation mode.
Aggregation mode is not enabled by default.
Related command: ip netstream aggregation.
Example
# Enable the autonomous system (AS) aggregation mode of Netstream.
<SW8800> system-view
[SW8800] ip netstream aggregation as
[3Com-aggregation-as] enable
ip netstream enable
Syntax
ip netstream enable slot slot-no
undo ip netstream enable slot-no
View
System view
Parameter
slot-no: Number of the slot where the NMM Application Module resides.
Stream destination IP(UDP)
Destination address and destination port number of the export
packet
packet
Exported stream number
Number of exported streams
Exported UDP datagram
number(failed number)
number(failed number)
Number of exported UDP packets (times of sending failures)
Version 9 MPLS export
information
information
Version 9 MPLS stream statistics export information
Version 8 tos-source-prefix
export information
export information
Version 8 statistics export information which has enabled the
ToS-source-prefix aggregation ( the disabled aggregation
function is not displayed )
ToS-source-prefix aggregation ( the disabled aggregation
function is not displayed )
Table 117 Description on the fields of the display ip Netstream export command
Field Description