3com 2928 Guida Utente
1-5
Table 1-2
Static aggregation group configuration task list
Task
Remarks
Required
Create a static aggregate interface and configure
Create a static aggregate interface and configure
member ports for the static aggregation group
automatically created by the system when you
create the aggregate interface.
By default, no link aggregation group exists.
By default, no link aggregation group exists.
Optional
Perform this task to view detailed information of
Perform this task to view detailed information of
an existing aggregation group.
Configuring a dynamic aggregation group
Perform the tasks in
to configure a dynamic aggregation group.
Table 1-3
Dynamic aggregation group configuration task list
Task
Remarks
Required
Create a dynamic aggregate interface and
Create a dynamic aggregate interface and
configure member ports for the dynamic
aggregation group automatically created by the
system when you create the aggregate interface.
LACP is enabled automatically on all the
member ports.
By default, no link aggregation group exists.
By default, no link aggregation group exists.
Optional
Perform this task to view detailed information of
Perform this task to view detailed information of
an existing aggregation group.
Optional
Perform the task to set LACP priority for the local
Perform the task to set LACP priority for the local
system and link aggregation member ports.
Changes of LACP priorities affect the
Changes of LACP priorities affect the
selected/unselected state of link aggregation
member ports.
The default port LACP priority and system LACP
The default port LACP priority and system LACP
priority are both 32768.
Optional
Perform the task to view detailed information of
Perform the task to view detailed information of
LACP-enabled ports and the corresponding
remote (partner) ports.
Creating a Link Aggregation Group
Select Network > Link Aggregation from the navigation tree, and then click Create to enter the page
as shown in
as shown in