3com S7906E Guida Di Riferimento
1-22
<Sysname> display cfd service-instance 7
Service instance 7:
Maintenance domain: mdtest_7
Maintenance association: matest_7
Level: 7 VLAN: 7 MIP rule: None CCM interval: 1s
MEP ID: 731 Interface: GigabitEthernet2/0/1 Direction: Inbound
Table 1-12 display cfd service-instance command output description
Field
Description
2 service instance(s) are configured.
Number of service instance configured.
Service instance 5
Service instance ID
Maintenance domain
MD of the service instance
Maintenance association:
MA of the service instances
Level MD
level
VLAN
VLAN that the MA belongs to
MIP rule
MIP generation rules configured on service instance
CCM interval
Interval to send CCMs
MEP ID
ID of MEPs configured on the service instance
Interface
Interface of the MEP configured on the service instance
Direction
Direction of the MEPs configured on the service instance
display cfd status
Syntax
display cfd status
View
Any view
Default level
2: System level
Parameters
None
Description
Use the display cfd status command to display the status of CFD (enabled or disabled).
Examples
# Display the status of CFD.
<Sysname> display cfd status
CFD is enabled.