Pico Macom ca30 Guida Specifiche
CA30/1000
Broadband 54-1000MHz
frequency range
(Channels CATV 2-158)
frequency range
(Channels CATV 2-158)
30dB gain for optimal carrier-
to-noise ratio and superior
picture quality
to-noise ratio and superior
picture quality
± 0.5dB flatness across band
provides low distortion and
excellent frequency response
provides low distortion and
excellent frequency response
Employs state-of-the art hybrid
push-pull technology for distor-
tion-free audio-video quality
push-pull technology for distor-
tion-free audio-video quality
Adjustable slope and gain con-
trols for easy system balancing
trols for easy system balancing
Easy-access controls and low-
loss (-20dB) test point enable
simplified setup and
performance monitoring
loss (-20dB) test point enable
simplified setup and
performance monitoring
Shielded enclosure provides
over 95dB RFI shielding per-
formance reducing leakage and
ingress
over 95dB RFI shielding per-
formance reducing leakage and
ingress
Built-in lightning and line volt-
age surge protection protects
the unit from damage
age surge protection protects
the unit from damage
Black anodized extruded alu-
minum heat-sink maximizes
heat dissipation for improved
reliability and corrosion
resistance
minum heat-sink maximizes
heat dissipation for improved
reliability and corrosion
resistance
Also available in a rack mount
version as CA30RK-1000
Headend Amplifier
version as CA30RK-1000
Headend Amplifier
The Pico Macom CA30/1000 is a high quality push-pull wall-mounted distribu-
tion amplifier producing signals with extremely low-noise and harmonic distortion.
The amplifier is capable of broadband 158-channel operation over the 54-
1000MHz range. This amplifier makes an excellent distribution system amplifier
for heavily loaded MDU and broadband CATV and SMATV systems. Because
of its extremely low-noise figure and low distortion, the CA30/1000 is ideally
suited for use in larger networks where amplifier cascading is required. In
expanding bi-directional broadband systems the CA30/1000 can be used in con-
junction with Tru-Spec Sub CATV diplexers to split forward and reverse paths.
Alternately Pico Macom’s PIDA series bi-directional amplifiers may be used.
tion amplifier producing signals with extremely low-noise and harmonic distortion.
The amplifier is capable of broadband 158-channel operation over the 54-
1000MHz range. This amplifier makes an excellent distribution system amplifier
for heavily loaded MDU and broadband CATV and SMATV systems. Because
of its extremely low-noise figure and low distortion, the CA30/1000 is ideally
suited for use in larger networks where amplifier cascading is required. In
expanding bi-directional broadband systems the CA30/1000 can be used in con-
junction with Tru-Spec Sub CATV diplexers to split forward and reverse paths.
Alternately Pico Macom’s PIDA series bi-directional amplifiers may be used.
CA30/1000
1GHz Broadband Push-Pull Distribution Amplifier
1GHz Broadband Push-Pull Distribution Amplifier
www.picomacom.com
DISTRIBUTION
Active Components
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
B-5
Rev. 12/02