Omnitron OmniConverter GPoE/S 9403-1-11 Manuale Utente
Codici prodotto
9403-1-11
OmniConverter
OmniConverter
TM
Power over Ethernet injector/source
■
10/100/1000 UTP to fiber media converter
■
Supports IEEE 802.3af PoE and IEEE 802.3at PoE+
■
standards on one or two UTP copper ports
Multiple port configurations:
■
2 Port Device: 1 Fiber + 1 UTP
•
3 Port Device: 2 Fiber + 1 UTP
•
3 Port Device: 1 Fiber + 2 UTP
•
4 Port Device: 2 Fiber + 2 UTP
•
Supports 1000BASE-X fixed-fiber and 1000BASE-X or
■
100BASE-FX SFP transceivers
Redundant protected fiber link option (using dual SFP
■
transceivers)
Compatible with legacy pre-IEEE standard powered
■
devices
Configurable PoE power reset
■
Available in AC and DC models
■
Commercial (0º to 50ºC), wide (-40º to 60ºC) and
■
extended
1
(-40º to 75ºC) operating temperature ranges
Lifetime Warranty and free 24/7 Technical Support
■
OmniConverter
GPoE/S and GPoE+/S
Gigabit Media Converter with Power over Ethernet (PoE/PoE+)
The OmniConverter GPoE/S and GPoE+/S are multi-port
media converters that convert 10/100/1000BASE-T
UTP to 1000BASE-X or 100BASE-FX fiber and support
Power-over-Ethernet (PoE and PoE+). Classified as Power
Sourcing Equipment (PSE), they can provide power to one or
two Powered Devices (PDs) using standard UTP cables that
carry the Ethernet data. The OmniConverter functions as a PoE
mini-switch, and supports a variety of port configurations are
available, including single or dual UTP and SFP ports.
The OmniConverter media converters can power PDs such as
The OmniConverter media converters can power PDs such as
VoIP phones, wireless access points, network cameras, building
access and automation equipment. They are especially useful
at powering PDs in hard-to-reach locations with limited access
to AC power outlets (ceilings, closets, etc.). The cost of bringing
electrical power to each device is eliminated by powering the
equipment through the UTP cable.
OmniConverter media converters are available in two power
OmniConverter media converters are available in two power
levels. GPoE/S models support PoE (IEEE 802.3af) and
provide up to 15.4W of power per UTP port. GPoE+/S models
support PoE+ (IEEE 802.3at) and provide up to 25.5W per
port for more demanding PDs such as video conferencing
equipment, PTZ (pan-tilt-zoom) cameras and 802.11n wireless
access points.
Models with two fiber ports support redundant fiber uplinks
Models with two fiber ports support redundant fiber uplinks
for critical applications that require protection and sub 50ms
restoration in the event of a fiber failure. The second fiber port
may also be used for daisy-chaining multiple media converters,
or it may be used as another switch port.
Configurable features include link modes which can propagate
Configurable features include link modes which can propagate
link faults from fiber to copper and copper to fiber, and a PoE
power reset function, in which a loss of fiber Rx link can disable
the PSE power output for 2 seconds to allow the remote PD
to re-initialize.
OmniConverter media converters support fixed-fiber connectors
OmniConverter media converters support fixed-fiber connectors
and Small Form Pluggable (SFP) transceivers, enabling easy
adaptability to different fiber types, distances and wavelengths.
The products support multimode, single-mode, single-mode
single-fiber, in standard and CWDM wavelengths.
The compact standalone OmniConverter media converters can
The compact standalone OmniConverter media converters can
be tabletop mounted, wall mounted, or DIN-rail mounted using
an optional DIN-rail mounting kit. They can also be mounted
on a 1U 19” rack-mount shelf. The products are DC powered
and available with an optional external 100 - 240VAC universal
power adapter.
Key Features
SFPs not included