Xanté aw 1200 Guida Utente
TCP/IP Configuration – 4-7
5.
Change the TCP/IP address class (fig. 4.4) if necessary (check with your System
Supervisor) and then click Change to the right of Network Class field. See
“TCP/IP Addresses” earlier in this chapter for class details.
Supervisor) and then click Change to the right of Network Class field. See
“TCP/IP Addresses” earlier in this chapter for class details.
6.
Change the printer’s default TCP/IP address (Network and Node IDs) to the
address assigned by your System Supervisor using the scroll arrows beside each
number (fig. 4.3 or 4.4); then, click Change to the right of the IP Address field.
address assigned by your System Supervisor using the scroll arrows beside each
number (fig. 4.3 or 4.4); then, click Change to the right of the IP Address field.
7.
Change the Subnet Mask using the scroll arrows to the right of the numbers if
necessary; then, click Change to the right of the Subnet Mask field.
necessary; then, click Change to the right of the Subnet Mask field.
8.
Change the DHCP setting if necessary; then, click Change to the right of the
DHCP field.
DHCP field.
9.
Close your browser; then, restart your printer to make the new TCP/IP address
take effect.
take effect.
Ping the printer using DOS Ping to verify the IP address in a PC environment. If you do
not get full replies, verify that you have the correct IP address configured for your printer.
not get full replies, verify that you have the correct IP address configured for your printer.
Using the Setip.ps File (Macintosh)
In a Macintosh environment, use Adobe Downloader to download the Setip.ps file to
your printer.
your printer.
1.
Open the Setip.ps file in a text editor, such as SimpleText.
2.
Change the IP address in parentheses to your printer’s IP address and save the
file.
file.
3.
Double-click the Adobe Downloader icon to open it.
4.
Select File: Download PostScript File (fig. 4.5).
Fig. 4.5 Adobe Downloader Menu