Xanté aw 1200 Guida Utente
8-16 – Troubleshooting
2.
Pull the front cover side latches forward and pull the cover forward and down
(fig. 8. 9). Then, hold the top cover on the right and left sides, lift up, and pull
back (fig. 8.10).
(fig. 8. 9). Then, hold the top cover on the right and left sides, lift up, and pull
back (fig. 8.10).
Fig. 8.9 Open Front Cover
Fig. 8.10 Open Top Cover
3.
Locate the jammed media. If it is not visible, skip to step 4. If it is in positions
A, B, C, or D in figure 8.9, use one of the following procedures to remove it.
A, B, C, or D in figure 8.9, use one of the following procedures to remove it.
A
B
C
D
Fig. 8.11 Visible Jams
a.
For positions A, B, and C: Hold the ends of the jammed media and pull
it slowly up and out of the printer.
it slowly up and out of the printer.
b.
For position D: Hold the ends of the jammed media and pull it slowly up
and out through the output tray.
and out through the output tray.