Xerox 4112 Guida Utente
Xerox 4112/4127 Copier/Printer System Administration Guide
4-6
4. E-mail
t. Select POP Password Encryption.
u. Select On (APOP) to encrypt the password, if desired and
u. Select On (APOP) to encrypt the password, if desired and
press
Save
and press
Close
twice.
4.
Configure the E-mail transmission
a. From the
a. From the
Connectivity & Network Setup
list, select
Outgoing/Incoming
(i.e. E-mail Send/Receive Settings).
b. Select
SMTP Server Settings
c. Select
SMTP Server Name / IP
.
d. Enter the SMTP Server Name/IP Address and press
Save
.
NOTE: Enter the address in the format "xxx.xxx.xxx.xxx". The
"xxx" should be a numeric value in the range from 0 to 255.
However, 224 - 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be
used.
"xxx" should be a numeric value in the range from 0 to 255.
However, 224 - 255.xxx.xxx.xxx and 127.xxx.xxx.xxx cannot be
used.
e. Select
SMTP Server Port Number
.
f. Enter a value in the range from 1 to 65535 and press
Save
. The default is 25.
g. Select
E-mail Send Authentication
.
h. Select one from [
Off
], [
POP before SMTP
], or [
SMTP
AUTH
]. Tip: If you are having trouble sending E-mail, to
see if Authentication is the problem, set this item to Off and
set the SMTP Server IP Address (above) to a server that
does not require authentication.
i. Select
SMTP AUTH Login Name
.
j. Set this item if [
SMTP AUTH
] is selected for [
E-mail Send
Authentication
].
k. Select
SMTP AUTH Password
.
l. Set this item if [
SMTP AUTH
] is selected for [
E-mail Send
Authentication
]. Enter the same password twice in the
[
New Password
] and [
Re-enter Password
]. If you do not
set the password, leave it blank and select
Save
and
Close
.