Xerox 2101 Guida Utente

5.5 Stapling

● When a message prompting you to replace staple cartridge appears, the machine will not start even if you press the Start

● When the positions for punching and stapling are in conflict (e.g. stapling on the top left and punching on the right), the machine

● When tray 5 (bypass) is selected, stapling can be carried out only if Plain/Heavywt 1 is selected for Paper Supply.
● For non-standard paper size, only sizes within 210 – 297 mm (Y direction) and 182 – 432 mm (X direction) can be used.
● If you attempt to staple copies exceeding the maximum number of sheets, stapling will be cancelled. 
● The maximum number of sheets that can be stapled is 50 using the staple cartridge for 50 sheets (optional) and 100 using the

● You can replace the installed staple cartridge with the optional staple cartridge for 50 sheets. Contact your Customer Support

● When option tray 7 is selected, staple positions are limited as follows. This limitation can be changed by means of a customer

×1 or Left ×2)

×1 or Top ×2)

● The Transparency option cannot be selected together with Repeat Image.
● If you are stapling Z-folded copies, the number of sheets that can be stapled is reduced.

Load the documents.

From Output, select how the copies are to be sorted.

Select Collated/Stapled/Punched.

● When loading mixed-size