Xerox 2101 Guida Utente
5.28 Copying with Stamp or Date
170
Making Copies
Added
Fe
atures
atures
Basic
Features
Image
Quality
Stor
ed
Job
Job
Templates
Output
Format
When printing Page Numbering:
Specify Display Format, Print On, Position and Font/Size.
When printing Set Numbering:
A serial number is printed for each set of copies. If the start number is set to 1,
1 is printed on all pages of the first copy and 2 is printed on all pages of the
second copy.
1 is printed on all pages of the first copy and 2 is printed on all pages of the
second copy.
(1)Select Enter.
The keypad on the control panel changes to the setting keys for Numbering.
(2)Enter a number by using the keypad.
4
Select Save to specify settings for other features if necessary.
5
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
then press Start on the control panel.
Copies will be made.
●
● A page number is printed at a
position adjacent to the square 10
mm inside from the top, bottom, right
and left edges of paper. A customer
engineer is permitted to adjust the
printing position. The setting is
common to date printing. Consult
your Customer Support Center.
mm inside from the top, bottom, right
and left edges of paper. A customer
engineer is permitted to adjust the
printing position. The setting is
common to date printing. Consult
your Customer Support Center.
● To enter the start number, select
Enter first. Use the keypad to
specify the number and select Enter
again.
specify the number and select Enter
again.
● A customer engineer is permitted to
change the copy management
printing size and density. Consult
your Customer Support Center.
printing size and density. Consult
your Customer Support Center.
● The start number is from 1 to 9999
for printing. After 9999, the number
will return to 1 and start
incrementing again.
will return to 1 and start
incrementing again.