Xerox 2101 Guida Utente

5.32 Copying Documents of Different Settings (Build Job)

If necessary, specify settings for Annotation, Output
Orientation, Covers,  Separators, and Output/Finishing/Z
Fold.

When adding annotation:

The setting is applied to a whole job.
Select Stamp, Date, Page Numbering or Set Numbering.

When specifying Output Orientation:

The setting is applied to a whole job.
Select Auto, Face Up, or Face Up Reverse Order.
Only Auto is available when specifying Output/Finishing.

When adding covers:

The setting is applied to a whole job. Nothing can be copied onto the cover. The
number of covers can be set from 1 to 99 as required. 
This cannot be set with the separators function.

When inserting separators:

You can insert a blank piece of paper as separator between segments. Nothing
can be copied onto the separators. The number of separators can be set from 1
to 99 as required.

When specifying Output/Finishing/Z Fold:

The setting is applied to a whole job.
If you add covers or insert separators, Y directions of the covers, separators,
and paper to be copied must be the same length.
For details about paper size for folding, refer to “5.7 Z-Folding”.

● When you select On for Save to File 

“5.23 Inserting Transparency 
Separators”
“5.26 Copying With Covers”

When there are stacks of documents that do not need separators:

Select Blank Covers of Covers on the Output Format screen for the first
document. 
Then, select No Covers of Covers for the stacks of documents that do
not need separators.