Xerox 3320dni Guida Utente
Loading Paper
Xerox Phaser 3320DN/3320DNI
User Guide
69
3.
Load envelopes short edge feed and with the flaps facing
down as shown in the illustration.
down as shown in the illustration.
4.
Adjust the paper guide to the width of the stack of print
material. Ensure you have not loaded too much print
media. The stack should be under the Maximum Fill line
indicated by the symbol
material. Ensure you have not loaded too much print
media. The stack should be under the Maximum Fill line
indicated by the symbol
.
5.
Open the rear door and leave the door open during
printing.
printing.
6.
When printing from your computer, ensure you select
Size on the driver Paper tab to specify the correct paper
size and type. Not confirming the paper details may
result in printing delays. For information about setting
the paper size and type in the printer driver, refer to
Size on the driver Paper tab to specify the correct paper
size and type. Not confirming the paper details may
result in printing delays. For information about setting
the paper size and type in the printer driver, refer to
Paper Tab
on page 38.
Note:
The settings made from the printer driver on your
computer override the settings on the control panel.
7.
After printing, close the bypass tray.