Xerox 4260s Guida Utente
12
Maintenance
Xerox WorkCentre 4260 User Guide
201
If the feature is enabled, a message will appear on the display screen advising you
to replace the Print Cartridge. If you want to replace the Print Cartridge now, open
the front door. The instructions on the screen will tell you how to fit a new cartridge.
to replace the Print Cartridge. If you want to replace the Print Cartridge now, open
the front door. The instructions on the screen will tell you how to fit a new cartridge.
If you do not want to replace the Print Cartridge now you can select the Abort
button. The machine will continue to operate but will NOT make copies or prints.
button. The machine will continue to operate but will NOT make copies or prints.
1.
Open the cover on the right side of the machine. This will reveal the latch used
to open the front cover. Open the front cover.
to open the front cover. Open the front cover.
2.
Remove the Print Cartridge.
The instructions that are packed with the
new Print Cartridge will tell you how to
dispose of the used Print Cartridge.
new Print Cartridge will tell you how to
dispose of the used Print Cartridge.
WARNING:
Only install the correct
Xerox Print Cartridge in the machine.
3.
Before unpacking the new Print
Cartridge, shake well to distribute
the toner. Remove from packaging.
Cartridge, shake well to distribute
the toner. Remove from packaging.
4.
To fit the new Print Cartridge, make sure the toner is facing the correct way up
5.
Insert the Print Cartridge.
6.
Close the front cover.
7.
Select the Confirm button on the machine display.
If after fitting a new
Print Cartridge the front
door will not close, check
that the Print Cartridge is
positioned and latched
correctly.
door will not close, check
that the Print Cartridge is
positioned and latched
correctly.
If you have replaced the Print Cartridge as a result of a “Replace the Print
Cartridge” message on the machine display, the machine will assume that you
have fitted a new cartridge and reset the toner usage counters and messages. If,
however, you have fitted a new Print Cartridge without being instructed to do so
by the machine display, the toner usage counters will need to be reset manually.
This is done in the Access tools mode using the Supplies Management - Print
Cartridge Re-order Notification
Cartridge” message on the machine display, the machine will assume that you
have fitted a new cartridge and reset the toner usage counters and messages. If,
however, you have fitted a new Print Cartridge without being instructed to do so
by the machine display, the toner usage counters will need to be reset manually.
This is done in the Access tools mode using the Supplies Management - Print
Cartridge Re-order Notification
feature.
Staple Cartridge
This procedure shows you how to remove a used Staple Cartridge and replace it
with a new Staple Cartridge.
with a new Staple Cartridge.
Front cover latch
Print Cartridge