Xerox 632 Guida Utente

1. To check the scan settings before scanning, click on the One 

Touch icon in the Windows Notification Area (at the bottom right 
corner of the screen).

The One Touch Button Panel opens. Click on the arrows to 
cycle through to the other buttons.

2. Right-click a button on the panel to see its description.

The One Touch Button Panel shows the description of the 
selected setting. This sample shows the current description of 
setting 6.

The One Touch Properties window for that setting also opens 
so you can change any settings before scanning.

3. When you are ready to scan, click the button on the One Touch 

Button Panel. See “Scan from the One Touch Button Panel” on 
page 26 for more about the Button Panel.

The One Touch Icon

This number corresponds 
to the LED on the scanner.

The icon indicates the 
Destination Application 
for this setting.

The current name of the 
setting.

Your document will be scanned with 
these options for setting Number 6.

Note: The configurations shown 
on this example of the One 
Touch Properties window are for 
illustration purposes only. The 
configurations you see on your 
One Touch Properties window 
may be different.