Xerox 123 Guida Di Riferimento
3 Copy
38
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
Document Feeder
The document feeder can hold up to 50 sheets of plain paper (16–32 lb bond or 38–
128 g/m
128 g/m
2
). The document can be any size of 140–297 mm for width and 210–432 mm
for length, and the standard sizes of A5–A3 SEF. Make sure the documents are in good
condition and remove all staples or paper clips before loading. The document feeder
senses standard sizes or you can manually enter a size using the [Scan Options] tab.
For information on how to copy mixed size originals using the document feeder, refer
to Mixed Size Originals on page 53.
NOTE: To reduce the risk of document feeder jams, use the document glass to copy
folded or creased documents. Replace folded or creased documents with the new
copy.
condition and remove all staples or paper clips before loading. The document feeder
senses standard sizes or you can manually enter a size using the [Scan Options] tab.
For information on how to copy mixed size originals using the document feeder, refer
to Mixed Size Originals on page 53.
NOTE: To reduce the risk of document feeder jams, use the document glass to copy
folded or creased documents. Replace folded or creased documents with the new
copy.
The machine is capable of sequentially scanning mixed size documents using the
document feeder. Align the documents against the top corner of the document feeder.
For information on how to copy mixed size originals using the document feeder, refer
to Mixed Size Originals on page 53.
document feeder. Align the documents against the top corner of the document feeder.
For information on how to copy mixed size originals using the document feeder, refer
to Mixed Size Originals on page 53.
1.
Before loading the documents
into the document feeder,
remove all staples and paper
clips.
into the document feeder,
remove all staples and paper
clips.
2.
Insert the documents neatly into
the document feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
the document feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
3.
Place the stack in the middle of the guides aligning the left edge with the
document feeder tray, and position the guides to just touch the edge of the
documents.
document feeder tray, and position the guides to just touch the edge of the
documents.
When [Auto] is selected in [Paper Supply], the machine automatically selects an
appropriate tray according to the document size. The selected tray, paper size and
orientation in the selected tray are displayed on the screen.
NOTE: This feature is available when the machine finds an appropriate tray. If there is
no appropriate tray, temporarily use manual selection for the tray or use the bypass
tray. For more information on tray selection, refer to Paper Supply on page 43.
appropriate tray according to the document size. The selected tray, paper size and
orientation in the selected tray are displayed on the screen.
NOTE: This feature is available when the machine finds an appropriate tray. If there is
no appropriate tray, temporarily use manual selection for the tray or use the bypass
tray. For more information on tray selection, refer to Paper Supply on page 43.
Document Glass
The document glass is used for a single page or bound document of 15–297 mm for
width and 15–432 mm for length.
width and 15–432 mm for length.