Xerox 5760 Guida Di Riferimento
USAGE GUIDELINES
14
MAJESTIK 5760/5765 MATERIALS USAGE GUIDE
Steps for Success
1 Run all coated papers from the Paper Tray Bypass, with the
glossy side up.
2 Select Heavy Paper Mode for the recommended papers and all
coated papers heavier than 105 gsm. Note: The Heavy Paper
Mode cannot be selected for papers larger than 8.5 x 11 inches.
Mode cannot be selected for papers larger than 8.5 x 11 inches.
3 Load all paper with the curl down in the tray.
4 Vigorously fan the stacks before loading to reduce multifeeds. If
multifeeds occur, single sheet feeding may be required.
5 For best image quality keep unused paper stored in a closed
package or resealable bag. Do not leave paper in the bypass
tray when not being used.
tray when not being used.
6 If a damaged or folded lead edge is found on jammed sheets,
manually curl the lead edge down before loading to minimize
jamming.
jamming.
7 Improperly clearing coated paper jams can cause machine
damage. When clearing jammed sheets, first try clearing the jam
from the Paper Tray Bypass. Next, open the front door and turn
knobs A, B and C in the direction shown by the arrows. Finally,
pull the Transfer Drawer out carefully to clear the jam.
from the Paper Tray Bypass. Next, open the front door and turn
knobs A, B and C in the direction shown by the arrows. Finally,
pull the Transfer Drawer out carefully to clear the jam.
CAUTION: Forcing the Transfer Drawer open may cause machine
damage resulting in a service call.
damage resulting in a service call.
CAUTION: The use of coated paper weights greater than 60 lb
cover (163 gsm) is likely to result in damage to the copier/printer
requiring a service call. Do not exceed the maximum recommended
paper weight with the exception of James River King James Cast
Coat 8 pt. (172 gsm).
cover (163 gsm) is likely to result in damage to the copier/printer
requiring a service call. Do not exceed the maximum recommended
paper weight with the exception of James River King James Cast
Coat 8 pt. (172 gsm).
Hints, Tips & Testing Results
Xerox testing has shown the following:
•
When the recommended materials are run as detailed above,
with the correct tray, mode, orientation and curl, feeding
performance is good, but will not equal 24 lb LX performance.
with the correct tray, mode, orientation and curl, feeding
performance is good, but will not equal 24 lb LX performance.
•
Coated papers are very susceptible to humidity. Image Mottle
(light patches in solid areas), or generally light image will occur if
paper is left open in environments with more than 40% humidity.
To avoid this, keep packages sealed; use sheets from the
center of the ream; or store unused paper in a ziplock bag.
Multifeeds are also much more likely with humidity greater than
40%.
(light patches in solid areas), or generally light image will occur if
paper is left open in environments with more than 40% humidity.
To avoid this, keep packages sealed; use sheets from the
center of the ream; or store unused paper in a ziplock bag.
Multifeeds are also much more likely with humidity greater than
40%.
•
A small percentage of sheets may exhibit toner on the lead
edge. Flipping the paper over or manually curling the lead edge
edge. Flipping the paper over or manually curling the lead edge
12 3. . .