Xerox 4215 Manuale Di Servizio
<
cut top 2"
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
G-8
Paper Facts
Follow the paper specifications outlined in
Table G-2 when selecting label stock.
Table G-2 when selecting label stock.
Table G-2
Label Specifications
Label Properties
Specification
Face Sheet
Must meet specifications in
Fusing
All adhesives, liners,
facestocks and other materials
used in the label construction
must be compatible with the
heat and pressure of the fusing
process. Materials must not
discolor, melt, offset material
facestocks and other materials
used in the label construction
must be compatible with the
heat and pressure of the fusing
process. Materials must not
discolor, melt, offset material
Construction
Total construction caliper must
not exceed 0.0070 inches (0.18
not exceed 0.0070 inches (0.18
Transparencies
Table G-3 summarizes the specifications to
consider when selecting transparencies.
consider when selecting transparencies.
Table G-3
Transparencies Specifications
Transparencies
Properties
Properties
Specification
Thickness
0.110 mm
3.9 to 4.5 mils
Cutting
Dimension
Dimension
+/- 0.7 mm
0.031 inch
Cutting angle
90° +/- 0.2°
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer