Xerox 4510 Manuale Utente

P o s t S c r i p t M e n u

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l

❖

3-35

Jam Recovery

Note: The default for Jam
Recovery is

for

firmware release 4.0. The
default is

Off

(as shown at

right) for releases > 4.0. To
determine the firmware
release of your printer,
print a Configuration
Sheet.

Off*

Determines how the printer recovers from a paper
jam. It is set independently for PCL and PostScript.

When

, the printer reprints any pages in the printer

at the time of the jam, after the jam has been cleared.
The printer does this by using a portion of memory to
store data. This setting can reduce printer speed with
minimum memory installed. Printer speed can be
increased by installing additional memory and/or
using the default setting of

Off

When

Off

, some pages may be lost after the jam has

been cleared. The print job must be resent, specifying
those pages that did not print as a result of the paper
jam.

See

“Printer Settings that Affect Memory” (page 3-67)

for further information.

Resolution

300x300

600x600*

Dots per inch (dpi).

Some software applications override this setting. If
your software application does not, the printer
assumes the default setting here.

Resolution

can be overridden by software when the

Xerox printer driver is installed.

Higher resolutions require more printer memory. See

“Printer Settings that Affect Memory” (page 3-67)

for

further information.

TrueRes

Off

On*

When

, smooths the curves in characters and

graphics to reduce coarseness, thereby improving
image quality.

TrueRes

can be overridden by software when the

Xerox printer driver is installed.

Figure 3.12 PostScript Menu options showing factory settings

(continued)

Option

Setting

Description

AUG-CH03 Page 35 Black,Red,Cyan Friday, February 3, 1995 12:22 AM