Xerox 100 Guida Utente
Optimizing print quality
6-2
Troubleshooting Guide
Correcting skewed printing
If the printed output is repeatedly delivered with the image
skewed (crooked on the page), or the pages are damaged when
delivered to the output bin, you may need to adjust the
registration transport roll (heavy paper) levers. This may occur
with heavy weight papers. Follow this procedure to correct this
situation:
skewed (crooked on the page), or the pages are damaged when
delivered to the output bin, you may need to adjust the
registration transport roll (heavy paper) levers. This may occur
with heavy weight papers. Follow this procedure to correct this
situation:
1. Open the right and left doors of the printer and locate the
heavy paper levers, behind areas 2 and 4.
2. Pull the levers forward (toward you) on the silver latch
release.
3. Turn both of the levers to the left (counter-clockwise), as
illustrated in the following figure.
Figure 6-1. Adjusting the registration transport roll levers
NOTE: If your system is equipped with the optional 7 by 10-
inch paper enablement kit, it has three levers, as shown in the
next illustration. (This kit is not available for the Model 96
NPS/IPS.)
inch paper enablement kit, it has three levers, as shown in the
next illustration. (This kit is not available for the Model 96
NPS/IPS.)
Turn the left-most lever to the left (counter-clockwise) and the
other two levers to the right (clockwise).
other two levers to the right (clockwise).