Xerox 100 Guida Utente
Troubleshooting Guide
7-1
7.
Resolving printer problems
This chapter describes various system problems and suggests
corrective actions.
corrective actions.
Symptom
Probable cause
Action
Papers are thrown around
the stacker.
the stacker.
Someone unloaded paper
by opening the top cover of
the stacker bin.
by opening the top cover of
the stacker bin.
Unload the bin following the normal
procedure. See “Unloading Stacker bin” in
Guide to Performing Routine Maintenance).
procedure. See “Unloading Stacker bin” in
Guide to Performing Routine Maintenance).
Paper stack falls over or
slides around the bin
slides around the bin
Excessive paper curl
Try adjusting for paper curl (See “Paper curl
and paper jams” in Guide to Performing
Routine Maintenance
and paper jams” in Guide to Performing
Routine Maintenance
Printing stops and the
printer console displays a
message indicating that an
incorrect paper size is
loaded in a feeder tray.
printer console displays a
message indicating that an
incorrect paper size is
loaded in a feeder tray.
Incorrect paper size, a
misfeed in feeder trays 3 or
4, or a damaged sheet.
misfeed in feeder trays 3 or
4, or a damaged sheet.
1. Check the paper in the indicated tray.
2. Check trays 3 and 4, and remove any
miisfed sheets.
3. If the paper is not the correct size, load
the correct size paper.
If the paper size is correct, press the
Continue button to resume printing.
Continue button to resume printing.