Xerox 220e Guida Di Riferimento
Using Different Printer Language Modes
9
Printing Reference
9-7
In the example below, all pen widths are set to 0.35 millimeters. Pen 0 is
white (this is the background pen color), pen 1 is black, pen 2 is red, pen 3 is
green, pen 4 is blue, pen 5 is cyan, pen 6 is magenta, and pen 7 is yellow.
white (this is the background pen color), pen 1 is black, pen 2 is red, pen 3 is
green, pen 4 is blue, pen 5 is cyan, pen 6 is magenta, and pen 7 is yellow.
The pen color change is persistent across jobs but not across printer power
cycles; it affects all HP-GL jobs that immediately follow it until the next
printer reset.
cycles; it affects all HP-GL jobs that immediately follow it until the next
printer reset.
Note
This Þle affects printer operation. If the printer is shared on a
network, using this Þle may affect the prints requested from other
users.
network, using this Þle may affect the prints requested from other
users.
CTRL-D
(%HP7475A%) << /Password ()
/ColorSetup (0 0.35 1.0 1.0 1.0
1 0.35 0.0 0.0 0.0
2 0.35 1.0 0.0 0.0
3 0.35 0.0 1.0 0.0
4 0.35 0.0 0.0 1.0
5 0.35 0.0 1.0 1.0
6 0.35 1.0 0.0 1.0
7 0.35 1.0 1.0 0.0)
>> setdevparams
CTRL-D
Allowable values for pen numbers are 0 through 255. Pen width is
measured in millimeters. Red, green, and blue values can be any number
between 0.0 and 1.0. The following table shows the red, green, and blue
combinations for each of the eight basic colors.
measured in millimeters. Red, green, and blue values can be any number
between 0.0 and 1.0. The following table shows the red, green, and blue
combinations for each of the eight basic colors.