Xerox 300x Manuale Utente
Caring for Your Printer
4
User Manual
4-29
8.
Install the paper tray.
9.
Press the
CLEAN PRINT HEAD
button.
After you press the button, the printer feeds the 10 sheets of paper
through the printer so that the fuser cleaning pad cleans the fuser
roller.
through the printer so that the fuser cleaning pad cleans the fuser
roller.
10.
Remove the paper tray.
11.
Remove the fuser cleaning pad.
12.
Install a new fuser wiper.
13.
Load another 10 sheets of standard office Bond paper (laser printer
or photocopy paper) into the paper tray. Be sure to load the paper
so that the long side of the paper enters the printer first, as shown
on page 4-22.
or photocopy paper) into the paper tray. Be sure to load the paper
so that the long side of the paper enters the printer first, as shown
on page 4-22.
14.
Install the paper tray.
15.
Press the
CLEAN PRINT HEAD
button.
After you press the button, the printer feeds the 10 sheets of paper
through the printer.
through the printer.
If any ink is visible on the paper, repeat Steps 13, 14, and 15.
16.
Return to normal operation by pressing the
TEST PRINT
button to
reach this display:
Utilities Vx.xx
Exit Next
17.
Press the
CLEAN PRINT HEAD
button to exit Utilities mode.