Xerox 3600 Manuale Supplementare

Pagina di 1
 
 
May 20, 2008 
Xerox Company Confidential
 
This document and its contents are the property of Xerox, Inc. and may not be reproduced in 
whole or in part or removed from company premises without written permission.
 
 
 
Xerox Phaser 3600 Printers 
Letter of Volatility 
 
Phaser 3600 series printers do not retain any latent user image in the mechanical 
system of the printer during normal operation. If a print job is disrupted prior to 
completion a latent image may exist in the mechanical systems of the printer; the image 
may be removed by cycling power or printing a page. 
 
Phaser 3600 series printers do not retain any latent image in the print controller (raster 
image processor) or associated RAM following the completion of printing.  No user data 
is maintained in the print controller or associated RAM following the cycling of power. 
 
Phaser 3600 series printers contain 16MB non-volatile nand flash memory on the 
controller for the storage of printer firmware and 4MB non-volatile flash memory for the 
storage of Fonts, Forms and Macros.  These modules do not retain any variable printing 
data and no user information is retained in this memory. 
 
The chart below shows the corresponding memory types for the Xerox Phaser 3600 
series printers.  
 
Model Number 
Memory Type 
Volatility 
User Data 
3600/B/N/DN SDRAM 
Volatile 
Yes
1
 
 
Flash ROM (Nand Flash) 
Non-Volatile 
No
3
 
 CRUM 
(EEPROM) 
Non-Volatile 
No
 
Font DIMM  
Non-Volatile 
No
 
Notes: 
1
  
SDRAM memory can be upgraded to 512MB for all models 
2
 
Contains printer configuration and operational parameters.  It does not contain user print data. 
Is used for firmware code, fonts, etc, does not contain any variable user print data.