Xerox 350 Manuale Utente

If Phaser 350 printer’s printer-specific PANTONE Colors are not printing as 
expected, make sure you are printing with Enhanced (600 x 300)  mode with 
color corrections set to None.  Refer to “Printing the PANTONE Color Chart” 
in the on-line manual on the printer’s CD-ROM for more information.  

There are many variables in process reproduction of colors generated by the 
Phaser 350 printer, any one of which may affect the quality of the PANTONE 
Color simulation, including: 

■

Type of ink used on printing press

■

Type of ink film used  on printing press

■

Effective final resolution

■

Dot structure/halftones 

If you have questions about PANTONE Color Matching, you can get 
information in the following places:

■

 Request a document catalog from HAL or EuroHAL, 

Tektronix’ automated fax systems.  Refer to “Using the automated 
fax systems” on page 6-2  for instructions on using HAL and 
EuroHAL.   

■

  If you have access to the Internet, you can view 

selected topics on the Phaser 350 printer’s web page.  Access the 
printer’s documentation from this web address:

http://www.tek.com/Color_Printers/userdoc/introduction.html 

If printed blue colors look too purple, print your document with the 
Vivid Color

 color correction.  Refer to “TekColor corrections — making the 

best selection” on page 4-3 for more information.