Xerox 300x Guida Utente
User Manual Release Note
11
■
To change the position of a point along a curve, delete an existing
point and add a new one.
point and add a new one.
■
Macintosh: Select the point so it turns black, then press the
Delete key.
Delete key.
■
Windows: Click on the point with the right mouse button.
■
It is possible to select any point on a curve at 5 percent intervals: 5,
10, 15, and so on. Not all percentages are visible in the edit boxes,
but all percentages are adjustable on the curves.
10, 15, and so on. Not all percentages are visible in the edit boxes,
but all percentages are adjustable on the curves.
■
There are limits to the amount of change available at any given
control point. A point is not allowed to be higher than the next
highest point, or lower than the next lowest point. For example, if
a curve has control points at 5, 25, and 50 percent, you cannot drag
the 25 percent point higher than the 50 percent point, or lower
than the 5 percent point.
control point. A point is not allowed to be higher than the next
highest point, or lower than the next lowest point. For example, if
a curve has control points at 5, 25, and 50 percent, you cannot drag
the 25 percent point higher than the 50 percent point, or lower
than the 5 percent point.
■
When editing CMY or CMYK, several curves are being adjusted at
the same time. It is best to change them all by the same amount so
the individual curves all have the same control points (or that all
curves have no control points).
the same time. It is best to change them all by the same amount so
the individual curves all have the same control points (or that all
curves have no control points).
If you have made adjustments to individual curves, and then need
to adjust all of the curves together, first click OK to save the
adjustments on the individual curves. Then, reopen the
Calibration Curves dialog box and select CMY or CMYK to adjust
all curves together.
to adjust all of the curves together, first click OK to save the
adjustments on the individual curves. Then, reopen the
Calibration Curves dialog box and select CMY or CMYK to adjust
all curves together.