Xerox 4510 Guida Utente
Printing on Specialty Media
Phaser® 4510 Laser Printer
3-34
■
For Monarch and DL envelopes, place the envelopes in the tray flap-side down with
the top of the envelope entering first.
the top of the envelope entering first.
3.
Insert the tray into the tray slot, and push the tray completely into the printer.
4.
On the control panel, select the envelope type and size:
a.
Select
Paper Tray Setup
, and then press the OK button.
b.
Select
Tray 2 Paper
,
Tray 3 Paper
, or
Tray 4 Paper
, and then press the OK button.
c.
If the size is correct and
Envelope
is displayed as the current paper type, select
Use
current setup
and then press the OK button. If the correct media type and size are not
displayed, change the setup:
■
Select
Change setup
, and then press the OK button.
■
Select
Envelope
from the list displayed, and then press the OK button.
■
Select the appropriate paper size, and then press the OK button.
5.
In the printer driver, select either Envelope as the paper type or the tray you just loaded as
the paper source.
the paper source.
4510-109
4510-152