Xerox 6130 Guida Utente

■

Place the printer on a level, solid non-vibrating surface with adequate strength for the 
weight of the printer. It should be within 1° of horizontal with all four feet in solid contact 
with the surface. The printer weight with consumables is 17.2 kg (38 lb.). 

■

Do not place the printer in locations exposed to magnetic forces.

■

Do not place the printer in damp locations.

■

Do not place the printer in locations susceptible to vibrations.

■

Wait 10-15 seconds between turning the printer off and on.

■

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

When the printer is printing:

■

Do not remove the paper source tray that you selected in either the printer driver or control 
panel.

■

Do not open the doors.

■

Do not move the printer.

 

■

Use the supplies specifically designed for your printer. The use of unsuitable materials 
may cause poor performance and a possible safety hazard.

■

Follow all warnings and instructions marked on, or supplied with, the printer, options, and 
supplies.

 

Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service 

Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or 
degradation of performance caused by use of non-Xerox supplies, or the use of Xerox supplies 
not specified for this printer. The Total Satisfaction Guarantee is available in the United States 
and Canada. Coverage may vary outside these areas; please contact your local representative 
for details.