Xerox 750P Guida Utente

After changing the density setting for any or all colors, reprint the Color Reference 
Page:

■

The dashed line reflects the new settings. 

■

In this example, the density for each color is set to a different value. 

This table shows the selections available in the Calibrate Colors menu.      

Calibrate Colors menu selections

Adjust light/dark
<----    ---->     Menu

Lightens or darkens all toner colors.
For best results adjust each color 
individually in the Adjust each color 
menu.

■

Press Menu.

 Lighter/Darker:+0    *

<----    ---->    OK

Lightens or darkens all toner colors. 

The current Light/Dark setting reflects 
the average value of the four separate 
density settings. Each increase adjusts 
all four density values up or down the 
same amount. The available 
adjustment range is limited so that no 
single color exceeds the ±10 value 
limit.

■

To lighten colors, press 

 (the number 

decreases in 1-point 
steps); then press OK.

■

To darken colors, press 

 (the number 

increases in 1-point 
steps); then press OK.

Adjust each color
<----    ---->     Menu

Controls the color density for each 
color independently.

■

Press Menu.

Color Reference Page
<----    ---->    Print

Prints a sample of the current density 
settings and a range of settings for each 
color.

■

Press Print.

9698-18.color