Xerox 740 Guida Utente

Pagina di 186
PhaserShare Networking Manual
21
PhaserShare Series B Network Interfaces
2
Using PhaserLink Printer Management Software to configure Token Ring
For information on connecting to your printer via PhaserLink Printer Management 
Software, see “Accessing printer information from a browser” on page 124.  For 
general information on PhaserLink Printer Management Software, see Chapter 12, 
“PhaserLink Printer Management Software”.
1.
From the printer’s home page, click Configuration; this displays the View 
and Configure Settings 
page.
2.
From the View and Configure Settings page, click View and Configure 
Interface Settings
; this displays the View and Configure Interface 
Settings 
page.
3.
From the View and Configure Interface Settings page, click View and 
Configure PhaserShare Settings (Token Ring card)
; this displays the View 
and Configure PhaserShare Settings
 page for Token Ring.            
4.
Enter your settings into the fields for Token Ring AddressSpeed, and 
Bridging
.  If you make an error, click Restore Initial Form Values and start 
again.
5.
When you are finished entering the settings, enter the Validation Password 
and click Do/Apply.  If you are not sure of the password, contact your 
system administrator.  
6.
You must reset the printer before the changes take effect.  For more 
information, see Chapter 16, “Resetting the Printer”.