Xerox 790DP Guida Utente
Installing the Duplex Tray
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-39
b.
Connect the tiny connector on the rear of the Upper Inverter to the
small jack in the access hole, as shown below.
small jack in the access hole, as shown below.
301132A-WOL
0
0301062b
e.
Install the new Connector Cover with the cutout into the access
hole, guiding the wires through the cutout in the cover.
hole, guiding the wires through the cutout in the cover.
301133A-WOL
0
301063b
CAUTION
Use caution if you must rearrange the tiny wires on the connector in order to
close the Connector Cover.
close the Connector Cover.