Xerox 8500 Manuale Supplementare
(g) Color coding shall not be used as
the only means of conveying
information, indicating an action,
prompting a response, or
distinguishing a visual element.
the only means of conveying
information, indicating an action,
prompting a response, or
distinguishing a visual element.
Supports
Color coding and additional means of unique identification
(e.g., text and symbols) are used.
(e.g., text and symbols) are used.
(h) When a product permits a user to
adjust color and contrast settings, a
range of color selections capable of
producing a variety of contrast levels
shall be provided.
adjust color and contrast settings, a
range of color selections capable of
producing a variety of contrast levels
shall be provided.
Not applicable
There are no color contrast settings.
(i) Products shall be designed to
avoid causing the screen to flicker
with a frequency greater than 2 Hz
and lower than 55 Hz.
avoid causing the screen to flicker
with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports
The flash rate of any flashing elements does not fall
between 2 Hz and 55 Hz.
between 2 Hz and 55 Hz.
(j) (1) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following: The
position of any operable control shall
be determined with respect to a
vertical plane, which is 48 inches in
length, centered on the operable
control, and at the maximum
protrusion of the product within the 48
inch length on products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls.
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following: The
position of any operable control shall
be determined with respect to a
vertical plane, which is 48 inches in
length, centered on the operable
control, and at the maximum
protrusion of the product within the 48
inch length on products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls.
Not applicable
The Phaser™ 8500/8550 is a portable device and can be
placed on a table of any height.
placed on a table of any height.
(j)(2) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is 10
inches or less behind the reference
plane, the height shall be 54 inches
maximum and 15 inches minimum
above the floor.
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is 10
inches or less behind the reference
plane, the height shall be 54 inches
maximum and 15 inches minimum
above the floor.
Not applicable
The Phaser™ 8500/8550 is a portable device and can be
placed on a table of any height.
placed on a table of any height.
(j)(3) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is more
than 10 inches and not more than 24
inches behind the reference plane,
the height shall be 46 inches
maximum and 15 inches minimum
above the floor.
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is more
than 10 inches and not more than 24
inches behind the reference plane,
the height shall be 46 inches
maximum and 15 inches minimum
above the floor.
Not applicable
The Phaser™ 8500/8550 is a portable device and can be
placed on a table of any height.
placed on a table of any height.
www.xerox.com/Section508
Page 7 of 9
Last Revision 1/16/2006