Xerox 6030 Guida Utente

 
Some documents will always exit to the rear at the completion of the 
scan regardless of the DOCUMENT RETURN setting. These documents 
include: 

• 

Thick documents 

• 

Documents longer than 5 feet (1.52 meters) 

• 

Documents over 36 inches (914 mm) in width  

 

MODE: 

MANUAL 

The user must enter the width of the document manually, and very 
carefully center the document when inserting it into the SCAN SYSTEM. 
The document is prescanned in this mode. 

AUTOWIDTH 

AUTOWIDTH enabled is the default setting.  When AUTOWIDTH is 
selected, the SCAN SYSTEM automatically detects the width of the 
document.AUTOWIDTH/AUTOCENTER. The document is prescanned in 
this mode. 

When AUTOWIDTH/AUTOCENTER is enabled, the SCAN SYSTEM 
automatically centers the image and automatically detects the document 
width.   

PRODUCTIVITY - ANSI 

PRODUCTIVITY is only available on SCAN SYSTEMs with AccXES 
firmware 10.0 or higher, SCAN SYSTEM firware 3.2.5

 

and the 

Productivity Document Feed Tray that includes discrete width sensors. 
PRODUCTIVITY - ANSI is the default. Other media type selections 
include ARCH, ISO A, ISO B, JIS B and CUSTOM. These selections 
must be made so that the sensors detect the correct width. This feature 
eliminates the prescan width measurement, which increases document 
throughput speed resulting in greater productivity. Use CUSTOM when a 
copy job has mixed width sizes. CUSTOM requires standard media sizes 
to be entered in CUSTOM MEDIA FORMATS (Menu, 
CONFIGURATION>COPY OPTIONS). 

AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in this 
mode.  

Reference Menu, CONFIGURATION>SCANNER CONTROL, MODE: for 
additional information.