Xerox 242 Guida Al Software

•

Automatic Synchronization with Xerox Support Server 
is enabled by default. 

•

You can enter or edit the Print Engine Serial Number. 

NOTE: Changing the serial number is not recommended, and 
should only be performed in special cases by the CSE or if 
Xerox specifically asks for the change to occur.

3. Click [Apply New Settings]. 

Or, click Restore Settings if you do not want to modify the 
capture settings and you want to restore the settings that were 
saved last.

The [Problem Reporting: Settings] page has an option that you 
can select to automatically delete captured data after it is 
transferred.

1. Select [Home: Problem Reporting: Settings].

2. Select the Capture tab.

3. If you want to delete the captured files from your system after 

they are transferred to Xerox, check the [Remove Capture 
Data after Transfer] checkbox. This eliminates the redundant 
storage of the files on your system. Or if you want to save the 
captured files clear the checkbox.

4. Enable Job Data Capture is enabled by default. If the 

selection box is not marked, the Job and Machine & Job data 
types cannot be selected on the Capture or Capture & 
Transfer pages. To disable this feature, remove the mark from 
the checkbox. 

5. Note the directory location of the captured files. This field is 

read-only. You can verify this location when you select files to 
transfer to Xerox.

6. Click [Apply New Settings] to save the settings. 

Or, click [Restore Settings] if you do not want to modify the 
capture settings and you want to restore the settings that were 
saved last.

1. Select [Home: Problem Reporting: Settings].

2. Select the Transfer tab.