Xerox 3210 Guida Utente

Using Windows PostScript Driver (WorkCentre 3220)

24

If you want to use the PostScript driver provided with your system CD-
ROM to print a document.

PPDs, in combination with the PostScript driver, access printer features 
and allow the computer to communicate with the printer. An installation 
program for the PPDs is provided on the supplied software CD-ROM. 

You can use the printer properties window, which allows you to access 
all of the printer options you need when using your printer. When the 
printer properties are displayed, you can review and change the settings 
needed for your print job. 

Your printer properties window may differ, depending on your operating 
system. This Software User’s Guide shows the Properties window for 
Windows XP.

Your printer driver Properties window that appears in this User’s Guide 
may differ depending on the printer in use.

:

• Most Windows applications will override settings you specify in the 

printer driver. Change all print settings available in the software 
application first, and change any remaining settings using the printer 
driver. 

• The settings you change remain in effect only while you are using the 

current program. To make your changes permanent, make them in 
the Printers folder. 

• The following procedure is for Windows XP. For other Windows OS, 

refer to the corresponding Windows User's Guide or online help.

1. Click the Windows 

Start button.

2. Select Printers and Faxes.

3. Select your printer driver icon.

4. Right-click on the printer driver icon and select 

Printing Preferences.

5. Change the settings on each tab, click OK.

You can use advanced settings by clicking the 

 button.

 

• Paper/Output this option allows you to select the size of the 

paper loaded in the tray.

• Graphic this option allows you to adjust the print quality for your 

specific printing needs.

• Document Options this options allow you to set the PostScript 

options or printer features.

You can click 

 from the upper right corner of the window, and then 

click on any setting.